Главная страница Тендеры по странам ЮАР: Тендеры

Addendum: Amendment to documents and extension of closing date: Term Tenders are hereby invited for the rehabilitation of bulk sewer lines (500 mm diameter and above) City Wide by method of CIPP lining. Framework Contract Period: 36 Months from Commencement Date. (Тендер №92732962ru)

Зарегиструйтесь

Поделиться:
Страна: ЮАР
Язык: EN
Номер: 92732962
Дата публикации: 18-10-2023
Источник:

Описание

Полная информация по тендеру закрыта.
Для дальнейшей работы с сайтом ознакомтесь с информацией ниже.

О нас

Ведущая поисковая система по тендерам и закупкам России и мира

  • Сама большая база тендеров и источников закупок России и мира
  • Бесплатная ежедневная рассылка по Вашим настройкам
  • Информация по победителям тендеров в нужном Вам формате
  • Удобное отображение и выгрузка информации

Выбрать нас

Начало работы

Регистрация на сайте, после которой Вам доступны следующие функции сайта:

  • Подписка на бесплатную рассылку по Вашим ключевым фразам
  • Просмотр анонсов тендеров
  • Выгрузка краткой информации в Excel формате
  • Просмотр части инфомации по победителям, поставщикам и заказчикам тендеров

Регистрация

Для использования всех функций сайта и просмотра полной информации Вам нужно оформить коммерческий аккаунт

  • Выбран тариф
  • Оплатить доступ любым из возможных способов

Полный доступ

Еще тендеры за этот срок

The Municipality hereby invites reputable and well experienced service providers to submit tenders for the following: Provision of Armed and Unarmed Grade C Security Services for 36 months. Please confirm the closing date as two were published. Источник: ONLINE TENDERS

Quotations are hereby invited for the following: Furniture & Accessories: Supply of eco - fan heater, qty: 4 each. Specifications: - Fan heaters required or equivalent X 4; - 2 heat settings 1000w / 2000w; - Cool, warm, or hot setting; - Power indicator light; - Adjustable thermostat control; - Thermal cut-out for overheat protection; - Integrated carry handle. Delivery date: 2024/07/01. Delivery to: Nicole Kuhn, No: 35 Rosmead Avenue. Delivery address: 35 Rosmead Avenue, Wynberg Depot, Cape Town. Источник: ONLINE TENDERS

Re-Advertisement: Quotations are hereby invited for the following: Lab freeze dryer, pump and UPS for Charm Lab at Sandringham Campus x 1. Laboratory freeze dryer specifications: • Compact, Free standing with a trolley to hold the instrument and vacuum pump; • Digital display; • Touch screen; • Stainless steel ice condenser capacity at least 8kg; • Condenser temperature at least -85° Celsius; • Fully automatic and programmable; • Vacuum pump (as per lyophilisation procedure requirements); • Stoppering chamber with a minimum of 3 heated, shelves-Overall diameter =350-400mm; • Pre-freezing of samples in the chamber; • Product trays to hold vials (2 sets); • Total loading surface of product trays approximate 1400cm²; • Training; • Electronic voltage SA compliant; • Safety compliant; • Operator manual; • Maintenance; • Delivery period: Approximate 4-6 weeks; • After sales service essential; • Warranty period: Min two years; • Service contract for the duration of the warranty. UPS specification: • 5KVA or greater online UPS; • AGM batteries; • Compatible with generator; • Network manageable; • Cold start capable; • Load/battery power meter display; • LED/LCD display. Источник: ONLINE TENDERS

Quotations are hereby invited for the following: Supply and delivery of ICT accessories. Specifications: - 50 x Dell/equivalent wireless mouse; - 30 x Microsoft/equivalent Bluetooth mouse; - 20 x E5 90W USB-C AC Adapter SAF with 1m Power Supply Cord 450-AGRS, Service Tag: 1W83NL3; - 2 x External DVD reader; - 2 x Laptop USB 3.0 external Hard drive reader enclosure; - 10 x SanDisk/equivalent 128 GB USB; - 5 x 20 pack AA 2500 mAh batteries rechargeable; - 20 x Pack of 10 Quotation file; - 10 x A4 Typex paper Box; - 10 x Casio 12mm black on white tape KL-740; - 20 x AA 2500 mAh batteries rechargeable; - 6 x Desk stick pen; - 5 x Laser Presentation Remote; - 2 x SSD card reader (Enclosure); - 5 x Double sided tape, 36mm x 33m; - 3 x USB and BT Speakerphone; - 5 x Type C Ethernet Extension Adapter; - 5 x 10 Way surge multi-plug. Источник: ONLINE TENDERS

Quotations are hereby invited for the following: Clothing, PPE & Accessories: - 5 each x chainsaw safety trouser (large); - 5 each x chainsaw safety trouser xl. Supply chainsaw pants (large) x 5 - must have B20 + main requirements: The following is a brief description of the main requirements that the trousers must comply with: - Protective coverage: Protective coverage is the area that is covered with protective material. Although 3 designs exist in the standard that was adopted for South Africa, the Ergonomics Working Group felt that design B will be the minimum requirement for South Africa and this was accepted as such; - Front: The specified protective area fully covers the front of the garment from 50mm above the end of the legs to 200mm above the crotch. It is allowed to leave out protective material at the fly. Between the crotch and fly a break of 30mm is allowed, but it is recommended to keep this break as small as possible; - Rear, left leg: The specified protective area covers on the inner side of the leg a 50mm wide strip from 50mm from the bottom to 50mm below the crotch. On the outer side of the leg it covers a 50mm wide strip extending from 50mm above the lower end of the leg to 200mm below the crotch and then tapering to zero at a height of 200mm above the crotch; - Rear, right leg: The specified protective area covers on the inner side of the leg a 50mm wide strip from 50mm from the bottom to 50mm below the crotch. It is allowed to extend the protective coverage, under the condition that the protection level is at least the same as in the specified protective area. There shall be no joins in the protective material within the specified protective area; - Dimensions in millimetres: 1=Level of crotch protective area, design B: Dimensional change: After pre-treatment (washing, drying, dry-cleaning) the dimensional change (shrinkage/stretch) shall be less than 6%; - Resistance to saw chain cutting: Although provision is made in the standard for 3 different chain speeds at which no cut through is permitted, the Ergonomics Working Group decided that 20 metres/second (class 1) would suffice for South Africa (This is also the speed at which most trousers are certified internationally). Note that the number of protective material layers is not prescribed in the standard, as this is irrelevant so long as the trousers pass this test; - Attachment of protective material: The protective material shall be permanently attached to the garment with the attachment able to resist a force of at least 200N when tested; - Marking: In order to identify trousers that comply with the standard, the standard makes provision for how the trousers must be marked. This will ensure that all buyers can easily identify these trousers. If the trousers are not marked in the appropriate way they don"t comply with the standard. The following pictogram must be placed at any visible place on the trousers: 20m/s Class 1. Supply chainsaw safety trouser (xlarge) x 5 - must be B20 + main requirements: - The following is a brief description of the main requirements that the trousers must comply with: - Protective coverage: Protective coverage is the area that is covered with protective material. Although 3 designs exist in the standard that was adopted for South Africa, the Ergonomics Working Group felt that design B will be the minimum requirement for South Africa and this was accepted as such; - Front: The specified protective area fully covers the front of the garment from 50mm above the end of the legs to 200mm above the crotch. It is allowed to leave out protective material at the fly. Between the crotch and fly a break of 30mm is allowed, but it is recommended to keep this break as small as possible; - Rear, left leg: The specified protective area covers on the inner side of the leg a 50mm wide strip from 50mm from the bottom to 50mm below the crotch. On the outer side of the leg it covers a 50mm wide strip extending from 50mm above the lower end of the leg to 200mm below the crotch and then tapering to zero at a height of 200mm above the crotch; - Rear, right leg: The specified protective area covers on the inner side of the leg a 50mm wide strip from 50mm from the bottom to 50mm below the crotch. It is allowed to extend the protective coverage, under the condition that the protection level is at least the same as in the specified protective area. There shall be no joins in the protective material within the specified protective area; - Dimensions in millimetres 1=Level of crotch protective area, design B; - Dimensional change: After pre-treatment (washing, drying, dry-cleaning) the dimensional change (shrinkage/stretch) shall be less than 6%; - Resistance to saw chain cutting: Although provision is made in the standard for 3 different chain speeds at which no cut through is permitted, the Ergonomics Working Group decided that 20metres/second (class 1) would suffice for South Africa (This is also the speed at which most trousers are certified internationally). Note that the number of protective material layers is not prescribed in the standard, as this is irrelevant so long as the trousers pass this test; Attachment of protective material: The protective material shall be permanently attached to the garment with the attachment able to resist a force of at least 200N when tested; - Marking: In order to identify trousers that comply with the standard, the standard makes provision for how the trousers must be marked. This will ensure that all buyers can easily identify these trousers. If the trousers are not marked in the appropriate way they don"t comply with the standard. The following pictogram must be placed at any visible place on the trousers: 20m/s Class 1. Delivery date: 2024/06/30. Delivery to: Dwayne Booysen Steenbras, WTP Off Faure Marine Drive, Gordons Bay. Delivery address: 1 Off Faure Marine Drive Gordon Bay. Please note that this quotation was published late. Источник: ONLINE TENDERS

Quotations are hereby invited for the following: Remove existing, supply and install 3 x Air Conditioners at St Barnabus Laboratory. Specifications: - Remove existing air conditioners, make good and cart away; - Supply and install 18 000 BTU Midwall split, heating and cooling air conditioner, must be inverter type using R410A refrigerant, install as per specification, air con type must be: LG, Carrier, York, Samsung, or Daiken or similar; - Re-connect to existing power supply. Источник: ONLINE TENDERS