Quotations are hereby invited for the following: Appointment of a service provider to undertake call-out for hazardous substance spill clean-up consisting of any fuel spills, hydraulic oils, Airports Company South Africa, Cape Town International Airport. Scope of work: The purpose of this requisition is to source a service provider for CTIA’s Fire Department that will provide: 1. Emergency response services and clean-up capabilities for hazmat spills on the aerodrome (e.g. chemicals, fuels, sewage); 2. Remediation in the event of a release to the environment; 3. Safe disposal of hazardous materials; 4. Supply hazmat materials, consumables, and equipment; 5. Disposal of hazardous waste from clean-ups (e.g., used absorbent materials) or from training exercises (burnt materials). Emergency Response Services & Remediation: When requested, the service provider is required to undertake the following: 1. Respond to emergency incidents on or relating to Cape Town International Airport; 2. Containment of hazardous material spills to limit downstream impacts and neutralize hazards on the aerodrome; 3. Remediation of the environment (land / water) in accordance with legislation; 4. Assist with Emergency Reporting requirements in terms of the National Environmental Management Act, the National Water Act, and local authorities amongst others; 5. Removal, transportation, and safe disposal of hazardous and non-hazardous waste, close out reports are to be issued post remediation of incidents, safe disposal certificates and waste manifest documents are to be provided for all waste disposed, the service provider will be accredited in terms of the legislation, and specifically in terms of the City of Cape Town’s Integrated Waste Management Bylaw to transport and dispose of waste. Disposal of Waste: - Spill absorbent booms used spill clean-up materials, and residue from training exercises will require disposal from time to time. The service provider will be responsible for the collection, removal, transportation, and disposal of waste to a suitable site; - The service provider will be accredited in terms of the legislation, and specifically in terms of the City of Cape Town’s Integrated Waste Management Bylaw to transport and dispose of waste. General: Service provider needs to make provisions for permits to access and operate within the aerodrome. (Тендер №97806086ru)

Зарегиструйтесь

Поделиться:
Страна: ЮАР
Язык: EN
Номер: 97806086
Дата публикации: 15-01-2024
Источник:

Описание

Полная информация по тендеру закрыта.
Для дальнейшей работы с сайтом ознакомтесь с информацией ниже.

О нас

Ведущая поисковая система по тендерам и закупкам России и мира

  • Сама большая база тендеров и источников закупок России и мира
  • Бесплатная ежедневная рассылка по Вашим настройкам
  • Информация по победителям тендеров в нужном Вам формате
  • Удобное отображение и выгрузка информации

Выбрать нас

Начало работы

Регистрация на сайте, после которой Вам доступны следующие функции сайта:

  • Подписка на бесплатную рассылку по Вашим ключевым фразам
  • Просмотр анонсов тендеров
  • Выгрузка краткой информации в Excel формате
  • Просмотр части инфомации по победителям, поставщикам и заказчикам тендеров

Регистрация

Для использования всех функций сайта и просмотра полной информации Вам нужно оформить коммерческий аккаунт

  • Выбран тариф
  • Оплатить доступ любым из возможных способов

Полный доступ

Еще тендеры за этот срок

The South African Medical Research Council (SAMRC) invite bids from appropriately experienced, qualified, professional, innovative and quality driven service providers with operational offices in Durban for the provision of catering services for their Kwa-Zulu Natal Regional Offices on an ad-hoc basis. Источник: ONLINE TENDERS

Quotations are hereby invited for the following: Appointment of a materials expert to conduct fit for purpose testing and assessment of foundation system for Agrément Certification. Specifications: The Pile Foundation System uses a steel pile group connected with a prefabricated steel pile cap to resist vertical (compression and uplift) and lateral loads. The system consists of a steel pile cap of thickness ranging from 4 mm to 10 mm and steel piles (circular hollow sections) of overall diameter of 42.4 mm, and thickness ranging from 2.5 mm to 4.0 mm. The base plates are drop forged and hot dip galvanized in accordance with SANS 121/ISO 1461. The pile foundation system can be applied to the following occupancy classes: A1, A2, A3, A4, A5, B1, B2, B3, C1, C2, D1, D2, D3, D4, E1, E2, E3, E4, F1, F2, F3, G1, H1, H2, H3, H4, H5, J1, J2, J3 as stated in SANS 10400-A. The assessment should be based on applicable standards. The service provider is expected to make recommendations regarding the suitability of the product for Agrément certification. All tests shall either be witnessed by an authorized Agrément South Africa assessor and be conducted by a registered competent person. All test reports must: - Provide the full name, description and intended use of the product; - Provide a technical description of the product; - Detail results of every aspect of the test against the performance requirements; - Be dated and; - Be signed by the test officer and presented in pdf format. Источник: ONLINE TENDERS

Quotations are hereby invited for the following: Appointment of a fire expert to conduct a behaviour in relation to fire assessment of a building system for Agrément Certification. Specifications: Superstructures comprise two types of insulated wall panels depending on the application. Wall Type 1 can be used externally and internally. It comprises two skins of chromadek sheets encapsulating a type FR Rockwool core. Wall Type 2 is used as an infill panel and comprises two skins of chromadek sheeting encapsulating an Expanded polystyrene core (EPS). These walls are type N and thus the total elevation area shall be constructed as a window or opening and the safety distances shall be applied. Foundations (sub-structures) are either conventional concrete rafts with thickened edge beams, light gauge steel chassis or suspended steel chassis. Foundations, including floors, are always a responsibility of a registered professional, competent engineer. Roofs are Standing Seam (SSR) panels and comprise two skins of chromadek sheeting encapsulating expanded polystyrene (EPS) core. Windows and doors are standard aluminum and are installed on site. Plumbing and electrical conduits are surface mounted or inside the panels. Источник: ONLINE TENDERS

Gauteng CET College is hereby inviting service providers to quote on the following: Supply and delivery of student card machine printer for Wattville CLC. Specifications: - Print mode: Colour dye; - Print speed - double-sided; - Card security: watermark be printed across the card surface; - Card capacity: Input hopper - up to 125 cards (up to 200); - Output hopper - up to 25 cards (up to 100 optional); - Warranty: 2 years; - Printer interfaces: High Speed USB 2.0, USB 3.0 compatible - Type B, 10/100 Ethernet; - Driver compatibility: Win 11 / Win 10, 2004 and above, both 32 / 64 bit; - Windows Server 2022 / 2019 / 2016 / 2012 R2, 64 bit; - MacOS latest version; - Linux with CUPS support; - Dye film: Half panel, double-sided dye film, prints colour on one side, black on reverse with overcoat panel 250 images; - Card types/thickness: Blank white cards with magnetic stripe; - Cleaning supplies: cleaning kit - 10 cleaning cards, 1 pen; - Software for a maximum of 400 000 students can be included; - Qty: 02. Источник: ONLINE TENDERS

Quotations are hereby invited for the following: Appointment of a structural expert to conduct fit for purpose testing and assessment of foundation system for Agrément Certification. Specifications: The Pile Foundation System uses a steel pile group connected with a prefabricated steel pile cap to resist vertical (compression and uplift) and lateral loads. The system consists of a steel pile cap of thickness ranging from 4mm to 10mm and steel piles (circular hollow sections) of overall diameter of 42.4mm, and thickness ranging from 2.5mm to 4.0mm. The base plates are drop forged and hot dip galvanized in accordance with SANS 121/ISO 1461. The pile foundation system can be applied to the following occupancy classes A1, A2, A3, A4, A5, B1, B2, B3, C1, C2, D1, D2, D3, D4, E1, E2, E3, E4, F1, F2, F3, G1, H1, H2, H3, H4, H5, J1, J2, J3 as stated in SANS 10400-A. The assessment should be based on applicable standards. The service provider is expected to make recommendations regarding the suitability of the product for Agrément certification. Источник: ONLINE TENDERS

Re-Advertisement: Quotations are hereby invited for the following: - Water repellent safety scrub suit, blue; - Water repellent safety wrap over dresses. Required at: Murchison Hospital - N2 Main Harding Road. Province: KwaZulu-Natal. Department: Department of Health. Division or Section: Central Supply Chain Management. Contract Period: Once off. Please confirm the closing date as two closing dates were published. Источник: ONLINE TENDERS